| 热轧无缝管一般在自动轧管机组上生产 |
| 添加时间：2019/10/16 15:47:12 浏览次数： |
| 热轧无缝管一般在自动轧管机组上生产。实心管坯经检查并清除表面缺陷，截成所需长度，在管坯穿孔端端面上定心，然后送往加热炉加热，在穿孔机上穿孔。在穿孔同时不断旋转和前进，在轧辊和顶头的作用下，管坯内部逐渐形成空腔，称毛管。再送至自动轧管机上继续轧制。最后经均整机均整壁厚，经定径机定径，达到规格要求。利用连续式轧管机组生产热轧无缝钢管是较先进的方法。 Hot rolled seamless tube is usually produced on automatic tube rolling mill. After the solid tube blank is inspected and the surface defects are removed, it is cut to the required length, centered on the end face of the piercing end of the tube blank, then sent to the heating furnace for heating, and perforated on the piercing machine. Under the action of the roller and the plug, a cavity is formed in the blank, which is called the blank. Then send it to the automatic tube rolling machine to continue rolling. Finally, the wall thickness of the whole machine is equalized and the diameter is calibrated by the sizing machine to meet the specification requirements. It is an advanced method to produce hot-rolled seamless steel tube by continuous rolling mill. |
| 上一页 什么是冷轧 |
| 下一页 冷拔时无缝钢管出现缺陷的具体原因 |
Copyright © 技术支持：遨游网络